Leadwork in York
Leaks around flashing or roof valleys? Check the lead details and adjoining coverings.
Request a free quoteUnderstanding leadwork
Leadwork is often found where a roof meets a wall, chimney or another roof slope. These junctions need to shed rain while accommodating the movement of the materials around them. A split, loose edge or poorly formed overlap can let water reach the layers below even when nearby tiles or slates appear sound. Assessment should establish the exact detail and the condition of its support, fixings and adjacent coverings. The aim is to specify a suitable repair or replacement for that junction, rather than treating every leak near a wall as the same flashing problem.
Signs to look for
- Staining close to a roof-to-wall junction
- Visible splitting or displacement in flashing
- Leaks near a valley or chimney during rain
What can cause the problem?
- Movement concentrated in an unsuitable detail
- Deteriorated fixings or poorly supported material
- Defective laps or connections to adjacent coverings
How the work is approached
Trace the junction involved
Identify the abutment, valley or chimney detail that could explain the reported leak. Consider adjoining coverings and drainage, because a symptom beside leadwork does not establish that the lead itself is the cause.
Examine support and movement
The condition beneath the visible metal can affect the repair. Ask whether lifting adjacent materials is necessary and what inspection limits remain if the underside or concealed fixings cannot be seen.
Describe the replacement detail
A useful scope explains the junction, material selection, support and connection to surrounding work. If a repair rather than renewal is proposed, its suitability for the existing detail should be clear.
Materials and specification
- Lead sheet selected for the specified detail
- Compatible clips and fixings
- Suitable supporting and separating materials
Relevant roof types
- Pitched roof valleys
- Roof-to-wall abutments
- Chimney junctions
Roofing questions, answered
Can a sealant patch replace failed leadwork?
A patch does not necessarily correct the movement, support or overlap that caused the defect. The proposed method should explain how it addresses the actual failure and whether it is temporary.
Does every valley need new lead?
No. Establish the existing valley construction and its condition first. Some leaks involve debris, neighbouring coverings or another detail, so material replacement should follow the findings.
Let’s take a look
at your roof.
Tell us what you’ve noticed. Start with your postcode and a few details — photographs are welcome.
